TRUMPF PARTING TOOL
Parting tool system for Trumpf style punch presses is designed to deliver exceptional value combining premium tool steel punch and die inserts with robust punch and die holders. Fully OEM compatible,Provides you with the most cost-effective slitting tool solution.
• The parting tool punch holder is designed to accept interchangeable punch blades up to a maximum length of 76.20mm, with widths of 5.0mm and 6.0mm or 5mm.
• The Parting Punch assembly is permanently set at 0º or 90º eliminating blade misalignment.
• The blades have a regrind life of 3.00mm and the assembly is limited to use in up to 3.00mm material. Blades are supplied with rooftop shear as standard to reduce punching force and noise.Special sizes and shapes available. Must fit within ranges as specified.
• Blades must be reground in vibration-free fixture with coolant.
• Blades supplied only with rooftop shear.
• Use with standard stripper.
TRUMPF PARTING TOOL HOLDERS
PUNCH HOLDER
Parting tool punch holder
Max 76.2mm,Code:TP-PH
Trumpf parting tool
DIE HOLDER 5 TYPE
Parting tool die holder
Max 56mm,Code:TP5-DH
Trumpf parting tool
DIE HOLDER 7 TYPE
Parting tool die holder
Max 76.2mm,Code:TP7-DH
Trumpf parting tool
TRUMPF PARTING TOOL PUNCH BLADE
PUNCH BLADE 5X30
Parting tool punch blade
5X30,Code:TP3-PBRE
Trumpf parting tool
PUNCH BLADE 5X56
Parting tool punch blade
5X56,Code:TP5-PBRE
Trumpf parting tool
PUNCH BLADE 5X76.2
Parting tool punch blade
5X76.2,Code:TP7-PBRE
Trumpf parting tool
TRUMPF PARTING TOOL DIE BLADE
DIE BLADE 5X30
Parting tool die blade
5X30,Code:TP3-DIRE
Trumpf parting tool
DIE BLADE 5X56
Parting tool die blade
5X56,Code:TP5-DIRE
Trumpf parting tool
DIE BLADE 5X76.2
Parting tool die blade
5X76.2,Code:TP7-DIRE
Trumpf parting tool
Size and shape
Parting tool, Max size 76.2mm. For Max thickness 3.0mm Mild steel, Shape available:Retangle,Oblong,Dovetail,Trapezoid
Width=5mm or less 5mm
Trumpf parting tool